How To Artex Over Artex

Artexing is the process of covering a surface with a textured plaster finish. It can be used to create a decorative or protective finish on walls and ceilings. Artex can be applied over existing artex, or over a smooth surface.

How To Artex Over Artex

There is no definitive answer to this question as it depends on the specific situation and materials used. In general, however, it is usually recommended that a coat of primer be applied before artexing over artex. This will help to create a smooth surface and ensure good adhesion between the two layers of artex.

– Artex – Paddle or trowel – Knife – Sandpaper – Primer – Paint

  • Apply a coat of sealant over the top
  • Apply a coat of primer to the surface
  • Use a wire brush to clean the surface of the artex
  • Paint on a layer of artex in the desired color

There are a few things to keep in mind when artexing over artex. First, make sure the surface is clean and dry before applying the new artex. Second, be sure to use a good quality primer to ensure good adhesion. Finally, be sure to use a roller or brush to apply the new artex evenly.


Frequently Asked Questions

Can You Just Plaster Over Artex?

There is no definitive answer to this question as it depends on the condition of the artex and the materials used in the plastering process. Generally, it is possible to plaster over artex, but it is important to ensure that the surface is prepared properly and that a good quality plaster is used.

Do You Have To Remove Artex Before Plastering?

There is no requirement to remove artex before plastering, but it is often recommended in order to provide a smooth surface for the plaster to adhere to.

How Do You Cover Old Artex?

There are a few ways to cover up old artex. One is to use a plasterboard which can be done by a professional or DIY. Another way is to skim the artex with a thin layer of plaster which can also be done by a professional or DIY.

What Is The Best Plaster For Covering Artex?

There is no definitive answer to this question as different plasters can be better or worse suited for covering artex, depending on the specific situation. For example, a skim of plaster may be better for covering a small patch of artex, while a thicker coat of plaster may be better for covering a larger area.

Can A Plasterer Skim Over Artex?

A plasterer can skim over artex, but it is not recommended. Skimming over artex can cause the artex to become brittle and flake off.

Does Artex Need To Be Removed?

Depends on what you mean by “artex.” If you are referring to a type of plaster, then the answer is yes, it should be removed. If you are referring to an artwork made with plaster, then the answer is no, it does not need to be removed.

What’S The Best Way To Cover Artex?

There is no definitive answer to this question as the best way to cover artex will vary depending on the specific circumstances. However, some tips on how to cover artex include using a plaster or compound, sanding the surface and then priming it before painting.

Can You Plaster Over Damaged Artex?

Yes, you can plaster over damaged artex. However, be aware that the final finish may not be as smooth as if the artex were undamaged.


Taking Everything Into Account

There is no one definitive way to artex over artex. Some people find that using a roller gives a smoother finish, while others prefer to use a brush. Whatever method is used, it is important to make sure that the surface is completely smooth before starting to apply the new layer of artex.

Similar Posts

Leave a Reply

Your email address will not be published.