Cleaning the auger on a Pit Boss vertical smoker is a fairly simple process. The first step is to remove the cooking grates and charcoal pan. Next, remove the heat deflector and ash catcher. Finally, unscrew the auger assembly and clean any debris from the inside of the barrel. Be sure to reassemble the auger assembly correctly before putting the smoker back together.
How To Clean Auger On Pit Boss Vertical Smoker
Cleaning the auger on a pit boss vertical smoker is a simple process. First, remove the cooking grates and charcoal pan from the smoker. Next, locate the auger cover on the back of the smoker and remove it. The auger can now be cleaned with a brush or vacuum cleaner. Be sure to replace the auger cover and reattach the cooking grates and charcoal pan when finished.
– barbecue brush – wire brush – cleaner (such as hot water, vinegar, or a commercial cleaner) – bucket – rubber gloves
- Locate the auger on the bottom of the smoker
- Pull out the auger and
- Use a screwdriver to remove the four screws that hold the auger in place
- Remove the cooking grates from the smoker
-Check the manufacturer’s instructions to see if there are any specific cleaning directions. -If not, try using a wire brush to clean off any residue. -If that doesn’t work, you can use a degreaser or a vinegar and water solution. -Make sure to rinse the smoker well after cleaning.
Frequently Asked Questions
Why Does My Pellet Grill Auger Keeps Jamming?
There could be a number of reasons why your pellet grill auger is jamming, but one of the most common reasons is because there is too much debris or grease clogging the auger. You can clean the auger with a brush or a vacuum cleaner to help remove any built-up debris.
How Do You Fix A Stuck Auger On A Pit Boss Pellet Grill?
If your auger becomes stuck on your pit boss pellet grill, the first step is to try to free it using a wooden or metal dowel. If the dowel doesn’t work, you can try using a pair of vice grips to grip the auger and pull it out. If that still doesn’t work, you can try using a hacksaw to cut the auger free.
How Do You Get The Pit Boss Auger Unstuck?
In order to get the pit boss auger unstuck, you should first try to determine the cause of the obstruction. Once you have identified the cause, you can take appropriate steps to clear the obstruction. Common causes of auger obstructions include foreign objects, build-up of material such as grease or fat, and a broken auger.
In The End
To clean the auger on a pit boss vertical smoker, unscrew the auger from the smoker and clean it with a brush. Be sure to reattach the auger to the smoker before use.