How To Replace Moen Faucet Cartridge 1224 B

If you have a Moen faucet with a cartridge number of 1224B, the following instructions will show you how to replace the cartridge.

How To Replace Moen Faucet Cartridge 1224 B

When your Moen faucet starts to drip or has low water pressure, the problem may be a worn-out cartridge. The cartridge is the part of the faucet that regulates the water flow. Replacing the cartridge is a simple process that most homeowners can do themselves. 1 Shut off the water supply to the faucet by turning off the shutoff valves under the sink. 2 Open the faucet and allow any remaining water in the lines to

-Replacement moen faucet cartridge 1224 b -Wrench -Channel lock pliers -Screwdriver -Towel

  • Remove the decorative cap from the top
  • Open the faucet to release any water pressure in the lines
  • Turn off the water supply to the faucet by closing the shutoff valves under the sink

-Replacing a Moen cartridge is a fairly easy process, but it is important to follow the correct steps to ensure that the cartridge is replaced properly. -First, turn off the water supply to the faucet by closing the valve under the sink. -Next, remove the handle from the faucet by unscrewing it. -Once the handle is removed, use a wrench to loosen the cartridge. -Finally, remove the old


Frequently Asked Questions

How Do You Remove A Stuck 1224 Cartridge?

There are a few ways to remove a stuck 1224 cartridge. You can try gently tapping on the cartridge with a small hammer, or using a pair of pliers to grip the cartridge and pull it out. If those methods don’t work, you can try heating the cartridge with a hair dryer or hot water.

How Do You Remove The Cartridge From A Moen 1224 Faucet?

The cartridge in a Moen 1224 faucet is removed by using a screwdriver to pry it out.

How Do You Get A Stuck Moen 1224 Cartridge Out?

There are a few ways to get a stuck Moen 1224 cartridge out. You can use a pair of pliers to try and grip it and pull it out, or you can try and use a screwdriver to pry it out. If those methods don’t work, you can try heating up the cartridge with a hair dryer to loosen the adhesive.


In The End

Replacing a Moen faucet cartridge is a fairly simple process, but it is important to follow the correct steps in order to ensure a proper repair. First, remove the faucet handle and the escutcheon plate. Next, use a wrench to remove the old cartridge. Finally, insert the new cartridge and reassemble the faucet.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *