How To Replace Moen Faucet Cartridge 1224

A moen faucet cartridge 1224 is a small cartridge that is inserted into the faucet body to control the water flow. It is a quarter turn cartridge and is easily removed and replaced.

How To Replace Moen Faucet Cartridge 1224

If you have a Moen faucet with a cartridge model 1224, you can replace the cartridge yourself. This is a relatively easy task, but it is important to follow the correct steps to ensure that the new cartridge is properly installed. To replace the cartridge, you will need to first shut off the water supply to the faucet. Then, use a wrench to remove the old cartridge. Make sure to dispose of the old cartridge properly, as it may contain lead

-Replacement Moen Faucet Cartridge 1224 -Wrench -Pliers -Screwdriver

  • Remove aerator from faucet
  • Remove handle by unscrewing it from
  • Unscrew retaining ring from top of faucet head
  • Shut off water supply to faucet

-Remove the faucet handle by unscrewing it from the faucet base -Unscrew the cartridge by turning it counterclockwise. Some Moen cartridges have a hexagonal end that can be gripped with a wrench for extra leverage. -Insert the new cartridge and screw it in clockwise. -Reattach the faucet handle.


Frequently Asked Questions

How Do You Remove A Moen Cartridge Without A Puller?

The first step is to identify the cartridge. The Moen cartridge is usually identified by the letters CA followed by a number. The number is usually stamped into the metal on the cartridge. Once the cartridge has been identified, locate the release clip. This is a small, circular clip located at the top of the cartridge. Use a small flathead screwdriver to pry it up. Once the release clip has been released, use a pair of pliers to grip the cartridge and pull it straight out.

How Do You Remove The Cartridge From A Moen Faucet?

The cartridge in a Moen faucet can be removed by using a wrench to loosen the retaining nut and then pulling the cartridge out.

How Do You Remove An Old Moen Cartridge?

To remove an old Moen cartridge, first turn off the water supply to the faucet. Next, unscrew the packing nut and remove the aerator. Finally, twist and pull the cartridge out of the faucet.

How Do I Remove A Stubborn Moen Shower Cartridge?

The best way to remove a stubborn Moen shower cartridge is to apply heat. You can do this by using a blowdryer, or heating it up with a lighter.

How Do I Remove A Moen Faucet Cartridge?

There are a few ways to remove a Moen faucet cartridge. One is to use a channel lock wrench to loosen the cartridge. Another is to use a basin wrench to loosen the cartridge. A third way is to use a special tool called a cartridge puller.

How Do You Remove A Moen Cartridge Without The Tool?

If you don’t have the cartridge removal tool, you can use a pair of needle-nose pliers. Grip the cartridge between the pliers’ jaws and twist it counterclockwise to remove it from the faucet. Be careful not to damage the cartridge or the faucet.

How Do You Change A Moen 1224 Cartridge?

Use a wrench to unscrew the cartridge from the faucet. Take the old cartridge out and insert the new one. Screw the cartridge back in place.

How Do I Remove A Stuck Moen 1222 Shower Cartridge?

There are a few ways to remove a stuck Moen 1222 shower cartridge. The first is to try to pry it out with a screwdriver or pliers. If that doesn’t work, you can try heating the cartridge up with a hair dryer or using a wrench to loosen it.

How Do You Remove The Cartridge From A Moen Bathroom Faucet?

To remove the cartridge from a Moen bathroom faucet, you will need to use a cartridge puller. The cartridge puller can be purchased at most hardware stores. Place the puller over the top of the cartridge and twist to remove.

How Do You Remove The Cartridge From A Moen 1224 Faucet?

First, turn off the water supply to the faucet. Next, locate the cartridge and remove the screw that holds it in place. Pull the cartridge out and replace it with a new one. Reattach the screw and turn on the water supply.


Wrap-Up

Replacing a Moen 1224 cartridge is a relatively easy process. First, turn off the water supply to the faucet. Next, unscrew the handle from the faucet body. Remove the old cartridge and replace it with the new cartridge. Screw on the handle and turn on the water supply.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *