Unscrewing a tub stopper is a relatively simple task that can be completed with a few basic tools. The first step is to find the screws that hold the stopper in place. These screws will typically be located on the underside of the stopper. Once the screws have been located, they can be removed with a Phillips head screwdriver. With the screws removed, the stopper can be lifted out of the tub.
How To Unscrew Tub Stopper
There is no one definitive answer to this question as the method for unscrewing a tub stopper depends on the type of stopper. However, some tips on how to remove a tub stopper include using a plunger to create suction and then pulling up on the stopper, using a screwdriver to pry the stopper loose, or using a wrench to loosen the screws that hold the stopper in place.
-Tub Stopper -Screwdriver
- Unscrew the nut that is holding the stopper in place
- Pull out the stopper
- Remove the overflow plate
If the tub stopper is a disk-type, gently insert a screwdriver or putty knife into the crack between the disk and the drainpipe and pry it up. If it doesn’t come loose easily, insert a plumber’s helper (a metal U-shaped tool) over the top of the disk and twist counterclockwise. If the stopper is a plunger-type, remove the suction cup and insert a screwdriver or putty knife into the slot
Frequently Asked Questions
How Do You Remove A Lift And Turn Tub Stopper Without Screws?
There is typically a small Allen wrench or screwdriver slot on the top of the lift and turn tub stopper. Use a tool to loosen the set screw and remove the stopper.
How Do You Remove The Stopper From A Bathtub Lift And Turn?
Remove the stopper by unscrewing it. To turn the bathtub lift, use the handle on the side to rotate it.
How Do I Remove A Lift And Turn Bath Stopper?
There are several ways to remove a lift and turn bath stopper. One way is to insert a wire hanger into the hole on the top of the stopper and twist it to loosen it. Another way is to use a pair of pliers to grip the edge of the stopper and pull it out.
In The End
To unscrew a tub stopper, insert a screwdriver into the slot on the top of the stopper and twist to loosen.